Standard Cleanroom Grade Vinyl
All Simplex vinyls are made from pure ingredients, no recycled materials.
Simplex vinyls are formulated to be fire-retardant and low-outgassing. Refer to
our data sheets for complete test results on the material required.
Thicknesses: .040, .060, .080, .120, and .160 mil.
Colors: Clear, frosted, white, amber tint, smoke tint, blue, grey, black and
Reinforced Vinyl Coated Fabric
This tough, vinyl-coated polyester material is ideal for areas in your
cleanroom or factory that are susceptible to frequent traffic and constant use.
The vinyl is also perfectly suited for applications that require a Class 1 fire
rating per ASTM E-84 flame spread and smoke test.
Thickness: 18 oz. (25 mil)
Colors: White, black, blue, grey, red, yellow and translucent frosted.
Polysim 509 Non-outgassing, Static Dissipative Polyurethane
Polysim 509 is made from an inherently static-dissipative urethane that
provides permanent, non-humidity dependent ESD protection for sensitive
manufacturing conditions such as computer disk drives, microelectronics, optics
and aerospace. There is no plasticizer used in Polysim, making the volatile
condensable contaminants extremely low. Because Polysim is an alloy using high
molecular weight materials, the static dissipation properties are permanent. It
does not wear off like many other materials that use only a surface coating.
Polysim is also Class 1 fire rated for flame spread and smoke test.
Thicknesses: .030 and .040 mil.
Colors: Clear, white and black.
Static Dissipative Vinyl
Our ESD vinyl is built with permanent built-in inhibitors. Unlike topical
coating, these inhibitors will not wear off and will last for the life of the
curtain. Test result show surface resistivity of 1.8 x 1010 ohm/cm
(ambient 50% R.H.) per ASTM D257.
Colors: Clear, frosted, white, black and amber tint.
Tested for Safety and Reliability
All Simplex softwall materials are fully tested. Test results are available for
fire retardancy, ESD, outgassing, sound abatement, chemical resistance and
light transmission. Refer to our data sheets for complete test results on the
Laser and Light Blocking Curtains
These specially designed softwall and curtain systems are popular for enclosing
or dividing areas for special processes, such as laser functions and
procedures, photo lithography and other light-sensitive work areas. Simplex's
opaque black vinyl blocks out 100% of the light transfer. The matte finish
reduces light refraction. Curtains are also available with foil inserts for use
with more powerful lasers. Simplex amber tinted curtains filter out various
degrees of blue, yellow and harmful ultra-violet light. Light wavelength tests
are available for Simplex red and amber tint curtains.
Thicknesses: .040 to .080 mil
Softwall width: Any size
Strip widths: 8" to 48"
Important Liability Disclaimer:
Due to the many different types of lasers, Simplex does not make any
performance claims for the laser protection contained in any of our curtains
used for laser applications. It is solely the end user's responsibility to test
samples of the curtains and their protective linings for performance and safety
and to determine their usability in a given application. Free samples will be
provided for testing upon request.